Low Creep Fireclay Refractory with Excellent Creep Rate for Carbon Furnace
The Description:
With special bauxite clinker as the main raw material, supplemented by special additives, the low creep high alumina brick is formed by high pressure and fired at high temperature. It has the advantages of large heat storage capacity and low creep rate, and is suitable for the supporting hot blast furnace of medium and small blast furnaces.
Physical and Chemcial Techncal Index
Item |
Composite mullite brick |
MG-65 |
EN-58 |
AL2O3%≥ |
65 |
59 |
Fe2O3% |
1.5 |
1.5 |
Apparent porosity% |
17 |
17 |
B.D g/cm3 ≥ |
2.5 |
2.35 |
C.C.S Mpa ≥ |
70 |
60 |
Creep rate 0.2Mpa% |
0.3 |
0.3 |
0.2Mpa R.U.L ºCT0.6ºC |
1500 |
1500 |
Product feature:
1, Refractoriness: refractoriness is usually between 1600-1800ºC, which is determined by the high melting point of its main component alumina.
2. Creep rate: The creep rate of low creep high aluminum bricks is generally between 0.1-0.4%. This means that at high temperatures for a long time, the deformation of this brick is small, which helps to maintain the stability of the kiln.
3, Apparent porosity: The apparent porosity of low creep high aluminum bricks is usually between 15-25%. The apparent porosity reflects the pore distribution inside the brick, and moderate apparent porosity is helpful to improve the thermal stability and thermal shock resistance of the brick.
4, Bulk density: The bulk density of low creep high aluminum bricks is generally between 2.4-2.8g /cm³. The bulk density affects the strength and wear resistance of bricks.
5, Compressive strength: The compressive strength of low creep high aluminum bricks is usually between 50-80 MPa. The high compressive strength helps to ensure that the brick does not break or deform at high temperatures.
6, Load softening temperature: the load softening temperature of low creep high aluminum bricks is usually between 1450-1550ºC. This indicator indicates the temperature at which a brick begins to deform under a certain pressure and is very important for high temperature environments such as industrial kilns.
7, Thermal shock resistance: low creep high aluminum brick has good thermal shock resistance, can withstand the rapid temperature change in the kiln. Under normal circumstances, the thermal shock resistance is expressed by the number of thermal shocks (1100ºC water cooling), such as withstand 20-30 or more thermal shock cycles.
Company main products and profiles:
Why choose us?
Zhengzhou Kaiyuan Refractories Co., Ltd is a manufacturer of silicon-aluminum refractory (fireclay brick, high alumina brick, silica brick, mullite brick, corundum brick, insulation brick, castable, mortar) for coke oven, blast furnace, hot blast stove, heating furnace, anode baking furnace, boilers and other industrial furnaces for 20 years located in Henan, China.
Our total annual production capacity is about 100,000 tons of dense-shaped refractory product, and 100,000 tons of monolithic refractory product.
We have three tunnel kilns for silicon-aluminum dense bricks and one new plant for the monolithic refractory.
We're sure our custom-made products and professional services will bring you a stable quality supply and more profit.
Our Laboratory and R&D Center
We have test equipment for the following items:
chemical %
bulk density
apparent porosity
cold crushing strength
modulus of rupture
refractoriness under load
creep
thermal expansion
Reheat linear change
thermal shock resistance
thermal conductivity
Contract Kiln Construction
FAQ
1. Are you a Manufacturer or trader?
A: We are manufacturer and our plant is located in Xinmi city, Henan, China
2. Can we visit your company?
A: You are warmly welcome to visit our company at anytime, you'll not regret of the visiting.
3. Do you accept OEM?
A: Yes, we do OEM.
4. What's the MOQ of trial order?
A: We care about all the potential customers and take all the trails orders.
5. What is the payment term?
A: TT, LC, DP, DA.
6. How long is the delivery time?
A: Usually within 35 days after down payment.
7. Do you accept third party inspection ?
A: Yes for sure, we accept the third party inspection before delivery.
8. What is your after-sell service?
A: The rejected goods can be replaced or we can make compensation for it. We can send technical engineers to the end user for technical issue.
9.What is your company's certification?
A: ISO9001 certificate