Customized Fireclay Refractory Brick for Andoe Baking Furnace
The Description:
1. Basic structure of anode baking furnace refractory lining:
(1) The "U" shaped air duct lining is generally made of clay brick masonry, followed by castable prefabricated block layer, and finally light firebrick insulation layer. The light firebrick at the bottom of the furnace is constructed by wet laying.
(2) The side wall and the refractory concrete are filled with lightweight castable.
(3) The connecting fire passage and ring flue lining can be constructed with fire-resistant spray paint.
(4) The center distance of each transverse wall, the width of the fire passage wall and the width of the material box should meet the design and construction requirements.
The content of Al2O3 in carbon furnace clay bricks is generally 30%-40%, and the content of Fe2O3 is less than 2.0-2.5%. Clay bricks for carbon roaster are weakly acid refractory products, which can resist the erosion of acid slag and acid gas.
Clay brick for carbon culture furnace is based on the production of general clay brick, using specific homogenizing material as the main raw material, adding appropriate amount of additives, after fine grinding, mixing, high pressure molding, at the appropriate firing temperature into mullite crystal phase, the use of products with good mineral composition, Thus, the product has high refractoriness, compact volume density, low porosity, excellent high temperature creep performance and good volume stability.
Technical index:
Items |
NGJ-16 |
NGJ-15 |
NGJ-145 |
NGJ-135 |
Sevice temperature |
1600 |
1500 |
1450 |
1350 |
Al2O3 % ≥ |
90 |
80 |
40 |
65 |
SIC % ≤ |
6-8 |
--- |
45 |
|
Bulk Density g/cm3 |
3.1 |
3 |
2.6 |
2.4 |
MOR Mpa ≥ |
110ºC*24h |
11 |
10 |
9 |
6 |
110ºC*3h |
13 |
12 |
12 |
7 |
CCS Mpa |
110ºC*24h |
80 |
70 |
65 |
55 |
110ºC*3h |
95 |
90 |
90 |
65 |
PLC ºC*3h |
0.5 |
0.5 |
0.5 |
0.5 |
Thermal conductivity(350+25ºC) |
1.3 |
1.3 |
1.2 |
1.1 |
Product feature:
1. Refractoriness:
The refractoriness of high aluminum refractory brick is higher than that of clay brick and semi-silicon brick, up to 1750~1790ºC, which is a high-grade refractory material.
2, load softening temperature:
Because the Al2O3 in high aluminum products is high, the impurity is less, the formation of fusible glass body is less, so the load softening temperature is higher than that of clay brick, but because the mullite crystallization does not form a network organization, the load softening temperature is still not high as silicon brick.
3, slag resistance:
High aluminum refractory brick Al2O3 more, close to the neutral refractory material, can resist the erosion of acidic slag and alkaline slag, because it contains SiO2, so the ability of alkali slag is weaker than the ability of acid slag.
Company main products and profiles:
Why choose us?
Zhengzhou Kaiyuan Refractories Co., Ltd is a manufacturer of silicon-aluminum refractory (fireclay brick, high alumina brick, silica brick, mullite brick, corundum brick, insulation brick, castable, mortar) for coke oven, blast furnace, hot blast stove, heating furnace, anode baking furnace, boilers and other industrial furnaces for 20 years located in Henan, China.
Our total annual production capacity is about 100,000 tons of dense-shaped refractory product, and 100,000 tons of monolithic refractory product.
We have three tunnel kilns for silicon-aluminum dense bricks and one new plant for the monolithic refractory.
We're sure our custom-made products and professional services will bring you a stable quality supply and more profit.
Our Laboratory and R&D Center
We have test equipment for the following items:
chemical %
bulk density
apparent porosity
cold crushing strength
modulus of rupture
refractoriness under load
creep
thermal expansion
Reheat linear change
thermal shock resistance
thermal conductivity
Contract Kiln Construction
FAQ
1. Are you a Manufacturer or trader?
A: We are manufacturer and our plant is located in Xinmi city, Henan, China
2. Can we visit your company?
A: You are warmly welcome to visit our company at anytime, you'll not regret of the visiting.
3. Do you accept OEM?
A: Yes, we do OEM.
4. What's the MOQ of trial order?
A: We care about all the potential customers and take all the trails orders.
5. What is the payment term?
A: TT, LC, DP, DA.
6. How long is the delivery time?
A: Usually within 35 days after down payment.
7. Do you accept third party inspection ?
A: Yes for sure, we accept the third party inspection before delivery.
8. What is your after-sell service?
A: The rejected goods can be replaced or we can make compensation for it. We can send technical engineers to the end user for technical issue.
9.What is your company's certification?
A: ISO9001 certificate