Special Mullite Castable for Outlet of Back Kilneye of Cement Kilns
The Description:
Corundum mullite castable is made of brown corundum, white corundum, andalusite, mullite and high quality bauxite as the main raw materials, adding superfine powder refractory powder by scientific formula proportional mixing. Corundum mullite refractory castable contains less mullite in nature, and the industrial mullite raw materials are synthetic, with high purity, relatively large density, good structure, low creep rate, small thermal expansion, good thermal shock resistance and chemical erosion resistance, widely used in refractory materials and other industries. Corundum mullite castable uses high quality refractory raw materials, and the refractory castable produced has good thermal shock resistance.
The Physical and Chemical Technial Index of Special Mullite Castable for Outlet of Back Kilneye of Cement Kilns
Brand Items |
High Alumina |
Mulllite |
Corundum |
KYSL-16C |
KYSL-16M |
KYSL-17C |
Al2O3 % ≥ |
65 |
70 |
85 |
Bulk Density kg/m3 |
110ºC*24h |
2.5 |
2.6 |
2.8 |
MOR Mpa ≥ |
110ºC*24h |
10 |
11 |
12 |
1400ºC*3h |
12 |
13 |
14 |
CCS Mpa ≥ |
110ºC*24h |
80 |
90 |
100 |
1400ºC*3h |
90 |
90 |
100 |
P.L.C% |
1400ºC*3h |
±0.5 |
±0.5 |
±0.5 |
Recommended application part |
Rear ourlet,kiln hood,rear end of cooler |
grate cooler,kiln Bood,tertiary duct |
front kilneye of large cement kiln,coal burner |
Characteristics of corundum mullite refractory castable:
It has the common advantages of corundum refractory castable and mullite castable. At high temperature, part of the matrix reacts in-situ to form mullite phase, which improves the high temperature thermal strength and thermal shock stability of the castable lining. It has high compressive strength at high temperature, good thermal shock resistance and structural spalling resistance. Good high temperature volume stability and thermal shock resistance, high softening temperature under load, low creep rate at high temperature, good chemical corrosion resistance
Corundum mullite castable Use: It can be used in petrochemical industry tubular heating furnace, light diesel oil, ethane-cracking furnace lining, atmospheric and vacuum furnace, sulfur recovery device, steam boiler, shell shell insulation layer, two cylinder and pipe insulation single layer, other industrial furnace door, fire viewing hole, observation hole door lining, large power station boiler anti-wear lining, gasifier, circulating fluidized bed boiler lining and cement rotary kiln coal injection pipe and other high temperature kiln With a lining.
Why choose us?
Zhengzhou Kaiyuan Refractories Co., Ltd is a manufacturer of silicon-aluminum refractory (fireclay brick, high alumina brick, silica brick, mullite brick, corundum brick, insulation brick, castable, mortar) for coke oven, blast furnace, hot blast stove, heating furnace, anode baking furnace, boilers and other industrial furnaces for 20 years located in Henan, China.
Our total annual production capacity is about 100,000 tons of dense-shaped refractory product, and 100,000 tons of monolithic refractory product.
We have three tunnel kilns for silicon-aluminum dense bricks and one new plant for the monolithic refractory.
We're sure our custom-made products and professional services will bring you a stable quality supply and more profit.
Our Laboratory and R&D Center
We have test equipment for the following items:
chemical %
bulk density
apparent porosity
cold crushing strength
modulus of rupture
refractoriness under load
creep
thermal expansion
Reheat linear change
thermal shock resistance
thermal conductivity
Contract Kiln Construction
Certificates
FAQ
1. Are you a Manufacturer or trader?
A: We are manufacturer and our plant is located in Xinmi city, Henan, China
2. Can we visit your company?
A: You are warmly welcome to visit our company at anytime, you'll not regret of the visiting.
3. Do you accept OEM?
A: Yes, we do OEM.
4. What's the MOQ of trial order?
A: We care about all the potential customers and take all the trails orders.
5. What is the payment term?
A: TT, LC, DP, DA.
6. How long is the delivery time?
A: Usually within 35 days after down payment.
7. Do you accept third party inspection ?
A: Yes for sure, we accept the third party inspection before delivery.
8. What is your after-sell service?
A: The rejected goods can be replaced or we can make compensation for it. We can send technical engineers to the end user for technical issue.
9.What is your company's certification?
A: ISO9001 certificate