High Alumina Well Refractory Bricks for Fixing Nozzle Brick
The Description:
A steel barrel (also known as a giant cup or a giant spoon, commonly known as a ladle or a large pot) is a container used to transport and dump molten metal. In many non-ferrous metal foundries, the ceramic crucible used to transport and dump molten metal is also considered a steel barrel. The steel drum is composed of a steel shell, a refractory liner and a opening and closing control system, and its cross-section is generally circular.
Technical Index:
Items |
Runner Brick |
Sleeve |
Alumina |
Clay |
BM-60R |
BM-C60R |
HL-32R |
BM-60V |
BM-50V |
HL-32V |
Refractoriness ºC ≥ ≥ |
37 |
37 |
32 |
37 |
36 |
32 |
B.D g/cm3 ≥ |
2.5 |
2.45 |
1.9 |
2.4 |
2.15 |
1.9 |
Apparent porosity % ≤ |
23 |
21 |
20 |
23 |
22 |
20 |
CCS ºC ≥ |
35 |
40 |
30 |
35 |
30 |
30 |
RUL ºC ≥ |
1500 |
1500 |
1300 |
1450 |
1400 |
1300 |
Thermal expansion≤ |
0.6 |
0.5 |
0.5 |
0.6 |
0.6 |
0.5 |
AL2O3≥ |
63 |
60 |
34 |
63 |
51 |
64 |
Fe2O3 ≤ |
2 |
2 |
2 |
2 |
2 |
2 |
Product feature:
The block is mainly used for continuous casting tundish and water nozzle matching. It has high corrosion resistance and has the advantages of no deformation and no crack when used with zirconium sizing nozzle
In modern metallurgy, gas blowing of molten steel begins in the smelting process and ends in the crystallizer. The breathable brick for ladle is an important functional element in this process.
The main properties of ladle breathable brick can be summarized as follows:
(1) High temperature erosion resistance
The refining ladle is very strict in terms of temperature and time, and the highest temperature is often more than 1750 ° C. During refining operation, the alkalinity of molten slag has a great influence on the life of refractory. The basicity of ladle refining slag varies in the range of about 0.6 ~ 0.4, so the refractory is eroded by acidic slag and alkaline slag with strong permeability at high temperature, and the damage rate is fast.
(2) High temperature wear resistance
Various ladle refining methods have adopted forced stirring, which is very serious to the high temperature wear of the brick.
(3) spalling resistance
Because it is intermittent operation, the temperature changes greatly, and it is easy to produce heat spalling and structural spalling, and the use conditions are very harsh. At present, there is a big gap between the performance of the ladle breathable brick seat and the performance it should have, such as in the aspects of high temperature erosion resistance and stripping resistance, especially the stripping resistance needs to be improved.
Application:
he block is mainly used for continuous casting tundish and water nozzle matching. It has high corrosion resistance and has the advantages of no deformation and no crack when used with zirconium sizing nozzle
Company main products and profile:
Why choose us?
Zhengzhou Kaiyuan Refractories Co., Ltd is a manufacturer of silicon-aluminum refractory (fireclay brick, high alumina brick, silica brick, mullite brick, corundum brick, insulation brick, castable, mortar) for coke oven, blast furnace, hot blast stove, heating furnace, anode baking furnace, boilers and other industrial furnaces for 20 years located in Henan, China.
Our total annual production capacity is about 100,000 tons of dense-shaped refractory product, and 100,000 tons of monolithic refractory product.
We have three tunnel kilns for silicon-aluminum dense bricks and one new plant for the monolithic refractory.
We're sure our custom-made products and professional services will bring you a stable quality supply and more profit.
Our Laboratory and R&D Center
We have test equipment for the following items:
chemical %
bulk density
apparent porosity
cold crushing strength
modulus of rupture
refractoriness under load
creep
thermal expansion
Reheat linear change
thermal shock resistance
thermal conductivity
Contract Kiln Construction
FAQ
1. Are you a Manufacturer or trader?
A: We are manufacturer and our plant is located in Xinmi city, Henan, China
2. Can we visit your company?
A: You are warmly welcome to visit our company at anytime, you'll not regret of the visiting.
3. Do you accept OEM?
A: Yes, we do OEM.
4. What's the MOQ of trial order?
A: We care about all the potential customers and take all the trails orders.
5. What is the payment term?
A: TT, LC, DP, DA.
6. How long is the delivery time?
A: Usually within 35 days after down payment.
7. Do you accept third party inspection ?
A: Yes for sure, we accept the third party inspection before delivery.
8. What is your after-sell service?
A: The rejected goods can be replaced or we can make compensation for it. We can send technical engineers to the end user for technical issue.
9.What is your company's certification?
A: ISO9001 certificate