Composite High Aluminum Refractory Bricks for Glass Tank Furnace Melts the Bottom of the Furnace
The description:
High aluminum brick is a kind of mid-range refractory brick in refractory shaped products, which is a neutral refractory material and is used in the furnace lining of industrial kilns.
The quality of high aluminum bricks is divided into different aluminum content and body density, and the refractoriness of high aluminum bricks reaches 1790ºC. It is also possible to add different ingredients of raw materials to produce different materials and composite firebricks. Adding a certain proportion of phosphoric acid, after low temperature sintering, can be produced into phosphate bricks, adding a certain proportion of silicon carbide, high temperature sintering can be produced into silicon Mo brick or silicon carbide brick. Adding different proportions of andalusite, sillimanite, can produce low creep high aluminum bricks, these three kinds of refractory bricks are also based on different content and volume density to distinguish different grades and quality of refractory bricks
Physical and chemcial index of Fireclay Brick Clay Refractory Block for Glass Furnace
Items |
DRL-145 |
DRL-140 |
DRL-135 |
Al2O3 % ≥ |
65 |
65 |
65 |
B.D g/cm3 ≥ |
2.6 |
2.5 |
2.45 |
Refractoriness ºC ≥ |
1790 |
1790 |
1790 |
RUL ºC ≥ |
1600 |
1580 |
1550 |
% P.L.C 1550ºC×2h |
0.1-0.4 |
0.1-0.2 |
0.1-0.4 |
Apparent porosity % ≤ |
21 |
22 |
22 |
Creep%(0.2Mpa*50h) |
0.8 |
0.8 |
0.8 |
Product feature:
1. Refractoriness; The refractoriness of high aluminum brick is higher than that of clay brick and semi-silicon brick, up to 1750-1790ºC.
2, soft load temperature: Because the aluminum oxide content in high aluminum brick products is high, less impurities, the formation of fusible glass body is less, so the soft load temperature is higher than the clay brick, the soft load temperature of high aluminum products is generally above 1420-1550ºC. However, because the mullite crystals did not form a network structure, the soft load temperature is still not as high as the silicon brick.
3, slag resistance; High aluminum bricks have more aluminum oxide, close to neutral refractory materials, which can resist the erosion of acidic slag and alkaline slag, because of the presence of silica, so the ability to resist alkaline slag is weaker than the ability to resist acid slag
4, chemical attack resistance: high aluminum refractory products resist acid or alkaline slag, metal erosion and oxidation, reduction reaction are very good, and with the increase of aluminum oxide content, the reduction of impurities and strengthen.
Application:
High aluminum brick is mainly used for laying blast furnace, hot blast furnace, electric furnace top, blast furnace, reverberation furnace, rotary kiln lining, in addition, high aluminum brick is also suitable for use as open furnace regenerator cell lattice brick, pouring system plug, water nozzle and so on.
Company main products and profiles:
Why choose us?
Zhengzhou Kaiyuan Refractories Co., Ltd is a manufacturer of silicon-aluminum refractory (fireclay brick, high alumina brick, silica brick, mullite brick, corundum brick, insulation brick, castable, mortar) for coke oven, blast furnace, hot blast stove, heating furnace, anode baking furnace, boilers and other industrial furnaces for 20 years located in Henan, China.
Our total annual production capacity is about 100,000 tons of dense-shaped refractory product, and 100,000 tons of monolithic refractory product.
We have three tunnel kilns for silicon-aluminum dense bricks and one new plant for the monolithic refractory.
We're sure our custom-made products and professional services will bring you a stable quality supply and more profit.
Our Laboratory and R&D Center
We have test equipment for the following items:
chemical %
bulk density
apparent porosity
cold crushing strength
modulus of rupture
refractoriness under load
creep
thermal expansion
Reheat linear change
thermal shock resistance
thermal conductivity
Contract Kiln Construction
FAQ
1. Are you a Manufacturer or trader?
A: We are manufacturer and our plant is located in Xinmi city, Henan, China
2. Can we visit your company?
A: You are warmly welcome to visit our company at anytime, you'll not regret of the visiting.
3. Do you accept OEM?
A: Yes, we do OEM.
4. What's the MOQ of trial order?
A: We care about all the potential customers and take all the trails orders.
5. What is the payment term?
A: TT, LC, DP, DA.
6. How long is the delivery time?
A: Usually within 35 days after down payment.
7. Do you accept third party inspection ?
A: Yes for sure, we accept the third party inspection before delivery.
8. What is your after-sell service?
A: The rejected goods can be replaced or we can make compensation for it. We can send technical engineers to the end user for technical issue.
9.What is your company's certification?
A: ISO9001 certificate