Monolithic High Alumina Refractory Mortar Unshaped Refractory Products
The Description:
Viscose refractory mortar, bonded with soft clay or chemical binder. It is mainly used for joint and repair of clay bricks. Clay refractory mortar can be bonded with water or phosphoric acid.
High alumina refractory mortar, made of high alumina clinker powder, soft clay powder or chemical bonding agent. For the joints of high aluminum brick masonry, high aluminum refractory mortar is also divided into different grades of mortar with different aluminum content, which is used according to the different aluminum content of high aluminum bricks.
The Physical and Chemical Technial Index of Monolithic High Alumina Refractory Mortar Unshaped Refractory Products
Items |
Index |
LN-55 |
LN-65 |
LP-75 |
LN-65P |
LP-75P |
LP-85P |
GN-90P |
Al2O3 % |
|
55 |
65 |
75 |
65 |
75 |
85 |
90 |
Refractoriness ºC ≥ |
|
1760 |
1780 |
1780 |
1780 |
1780 |
1780 |
1780 |
MOR /Mpa |
110ºC |
1.0 |
1.0 |
1.0 |
2.0 |
2.0 |
2.0 |
2.0 |
1400ºC*3h |
4.0 |
4.0 |
4.0 |
6.0 |
6.0 |
-- |
-- |
1500ºC*3h |
-- |
6.0 |
6.0 |
RUL |
|
|
1400
1600 |
1600 |
1650 |
Permanent linear change% |
1400ºC*3h |
-5~+1 |
-- |
1500ºC*3h |
-- |
-5~+1 |
Bonding time min |
|
1-3 |
Grain size |
<1.0mm |
100 |
>0.5mm |
2 |
<0.75mm |
50 |
40 |
Application:
Monolithic High Alumina Refractory Mortar Unshaped Refractory Products used in thermal insulation layer(preheater,decomposing furnace,tertiary duct,kiln hood,coller,etc)
The Feature:
1, The chemical stability of high aluminum refractory mortar is good, at high temperature and furnace gas, slag does not react chemically, does not produce erosion, not easy to peel and powder, can maintain its protective effect for a long time.
2, High aluminum refractory mortar has good thermal stability, strength and wear resistance at high temperature are not reduced, it is not easy to soften, crack and flake, and can maintain its physical and mechanical properties for a long time.
3, High aluminum refractory mortar has low water absorption, low water absorption at high temperature, high porosity, good slag resistance, strong erosion resistance, and can maintain its use effect for a long time.
4, High aluminum refractory mud volume stability and load softening temperature is high, good volume stability at high temperature, will not be affected by heat deformation and use effect.
5, High aluminum refractory mud has low thermal conductivity, low thermal conductivity at high temperature, which can reduce the heat loss of the furnace lining and reduce the production cost.
Company main products and profile:
Why choose us?
Zhengzhou Kaiyuan Refractories Co., Ltd is a manufacturer of silicon-aluminum refractory (fireclay brick, high alumina brick, silica brick, mullite brick, corundum brick, insulation brick, castable, mortar) for coke oven, blast furnace, hot blast stove, heating furnace, anode baking furnace, boilers and other industrial furnaces for 20 years located in Henan, China.
Our total annual production capacity is about 100,000 tons of dense-shaped refractory product, and 100,000 tons of monolithic refractory product.
We have three tunnel kilns for silicon-aluminum dense bricks and one new plant for the monolithic refractory.
We're sure our custom-made products and professional services will bring you a stable quality supply and more profit.
Our Laboratory and R&D Center
We have test equipment for the following items:
chemical %
bulk density
apparent porosity
cold crushing strength
modulus of rupture
refractoriness under load
creep
thermal expansion
Reheat linear change
thermal shock resistance
thermal conductivity
Contract Kiln Construction
Certificates
FAQ
1. Are you a Manufacturer or trader?
A: We are manufacturer and our plant is located in Xinmi city, Henan, China
2. Can we visit your company?
A: You are warmly welcome to visit our company at anytime, you'll not regret of the visiting.
3. Do you accept OEM?
A: Yes, we do OEM.
4. What's the MOQ of trial order?
A: We care about all the potential customers and take all the trails orders.
5. What is the payment term?
A: TT, LC, DP, DA.
6. How long is the delivery time?
A: Usually within 35 days after down payment.
7. Do you accept third party inspection ?
A: Yes for sure, we accept the third party inspection before delivery.
8. What is your after-sell service?
A: The rejected goods can be replaced or we can make compensation for it. We can send technical engineers to the end user for technical issue.
9.What is your company's certification?
A: ISO9001 certificate