Checker Silica Refractory Material Silica Brick for Hot Blast Furnace
The Description:
Silica brick for hot blast stove (silica brick for hot blast stove) is used to lay silica refractory products with squamous quartz as the main crystalline phase in the high temperature part of the hot blast furnace. The hot air temperature of the blast furnace has increased from 500-650 ° C in the 1940s to 1000 ° C in the 1970s, and the hot air of the large blast furnace in the 1980s has increased to 1350 ° C. Due to the increase of wind temperature, the clay brick or high aluminum brick used in the high temperature part of the previous hot blast stove has been gradually replaced by silicon brick and low creep high aluminum brick.
Technical Index:
Items |
Silica bricks for hot-blast |
DRN-125 |
SiO2 % ≥ |
45 |
0.2Mpa Refractoriness under loadºC ≥ |
1650 |
B.D g/cm3 ≥ |
2.35 |
% P.L.C 1400ºC×2h |
0.1-0.3 |
Apparent porosity % ≤ |
22 |
Cold crushing strength Mpa ≥ |
35 |
The silicon brick of hot blast furnace has the following characteristics:
(1) Under the conditions of long-term high temperature and load, the volume is stable, the high temperature creep rate is low, and one or even two blast furnaces can be used continuously.
(2) It has good thermal shock resistance above 600ºC. Adapt to the temperature variability of hot blast furnace, so that the brick and masonry remain intact.
(3) Chemical erosion resistance is better than clay bricks and general high aluminum bricks. The erosion of the silicon brick by the alkaline substances in the gas and dust is limited to the formation of a glass phase on the surface, and does not occur spalling.
(4) The thermal conductivity of silicon bricks is larger than that of clay bricks and high aluminum bricks, which is conducive to storing and releasing heat in a short time.
Company main products and profile:
Why choose us?
Zhengzhou Kaiyuan Refractories Co., Ltd is a manufacturer of silicon-aluminum refractory (fireclay brick, high alumina brick, silica brick, mullite brick, corundum brick, insulation brick, castable, mortar) for coke oven, blast furnace, hot blast stove, heating furnace, anode baking furnace, boilers and other industrial furnaces for 20 years located in Henan, China.
Our total annual production capacity is about 100,000 tons of dense-shaped refractory product, and 100,000 tons of monolithic refractory product.
We have three tunnel kilns for silicon-aluminum dense bricks and one new plant for the monolithic refractory.
We're sure our custom-made products and professional services will bring you a stable quality supply and more profit.
Our Laboratory and R&D Center
We have test equipment for the following items:
chemical %
bulk density
apparent porosity
cold crushing strength
modulus of rupture
refractoriness under load
creep
thermal expansion
Reheat linear change
thermal shock resistance
thermal conductivity
Contract Kiln Construction
FAQ
1. Are you a Manufacturer or trader?
A: We are manufacturer and our plant is located in Xinmi city, Henan, China
2. Can we visit your company?
A: You are warmly welcome to visit our company at anytime, you'll not regret of the visiting.
3. Do you accept OEM?
A: Yes, we do OEM.
4. What's the MOQ of trial order?
A: We care about all the potential customers and take all the trails orders.
5. What is the payment term?
A: TT, LC, DP, DA.
6. How long is the delivery time?
A: Usually within 35 days after down payment.
7. Do you accept third party inspection ?
A: Yes for sure, we accept the third party inspection before delivery.
8. What is your after-sell service?
A: The rejected goods can be replaced or we can make compensation for it. We can send technical engineers to the end user for technical issue.
9.What is your company's certification?
A: ISO9001 certificate