Refractory Castable For Circulating Fluidized Bed Boiler
The Description:
The furnace and the furnace wall are in direct contact with the high-temperature fuel, so it is necessary to use a refractory castable with high refractoriness, wear resistance, slag resistance and good thermal stability. High aluminum refractory castable or aluminate refractory castable is recommended, which can effectively protect the furnace and furnace wall against high temperature and fuel erosion.
Refractory castables in the return cover and separator parts need to have high wear resistance and chemical erosion resistance. In these parts, phosphate-bound refractory castables with superior wear and corrosion resistance can be used.
The parts of economizer need refractory castables with good thermal stability, abrasion resistance and chemical erosion resistance. High aluminum refractory castable or aluminate refractory castable is recommended to provide effective protection at the economizer site.
Tail flue and flue gas treatment equipment require refractory castables with good corrosion resistance and thermal stability. In these areas, aluminate refractory castable or phosphate bonded refractory castable can be used, which can resist the acid in the flue gas to attack the equipment
The main function of the insulation layer is to reduce heat loss and improve the thermal efficiency of the boiler. In the insulation layer, it is recommended to use lightweight refractory castable, which has low thermal conductivity and good insulation performance.
The slag outlet and fly ash outlet parts need refractory castables with high wear resistance, slag resistance and chemical erosion resistance. In these parts, high aluminum refractory castable or low cement refractory castable can be used, which can maintain good stability and protection at high temperatures
Air distribution ducts and mill parts require refractory castables with high wear resistance. In these parts, high aluminum refractory castables with superior wear resistance or high strength wear-resistant refractory castables can be used.
The physical and Chemcial index of Refractory Castable For Circulating Fluidized Bed Boiler
| Items |
NGJ-16 |
NGJ-15 |
NGJ-145 |
NGJ-145 |
NGJ-135 |
| Sevice temperature |
1600 |
1500 |
1450 |
1450 |
1350 |
| Al2O3 % ≥ |
90 |
80 |
75 |
40 |
65 |
| SIC % ≤ |
6-8 |
--- |
|
45 |
|
| Bulk Density g/cm3 |
3.1 |
3 |
2.7 |
2.6 |
2.4 |
| MOR Mpa ≥ |
110ºC*24h |
11 |
10 |
7 |
9 |
6 |
| 110ºC*3h |
13 |
12 |
8 |
12 |
7 |
| CCS Mpa |
110ºC*24h |
80 |
70 |
60 |
65 |
55 |
| 110ºC*3h |
95 |
90 |
80 |
90 |
65 |
| PLC ºC*3h |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
| Thermal conductivity(350+25ºC) |
1.3 |
1.3 |
1.2 |
1.2 |
1.1 |
Why choose us?
Zhengzhou Kaiyuan Refractories Co., Ltd is a manufacturer of silicon-aluminum refractory (fireclay brick, high alumina brick, silica brick, mullite brick, corundum brick, insulation brick, castable, mortar) for coke oven, blast furnace, hot blast stove, heating furnace, anode baking furnace, boilers and other industrial furnaces for 20 years located in Henan, China.
Our total annual production capacity is about 100,000 tons of dense-shaped refractory product, and 100,000 tons of monolithic refractory product.
We have three tunnel kilns for silicon-aluminum dense bricks and one new plant for the monolithic refractory.
We're sure our custom-made products and professional services will bring you a stable quality supply and more profit.
Our Laboratory and R&D Center
We have test equipment for the following items:
chemical %
bulk density
apparent porosity
cold crushing strength
modulus of rupture
refractoriness under load
creep
thermal expansion
Reheat linear change
thermal shock resistance
thermal conductivity
Contract Kiln Construction
Certificates
FAQ
1. Are you a Manufacturer or trader?
A: We are manufacturer and our plant is located in Xinmi city, Henan, China
2. Can we visit your company?
A: You are warmly welcome to visit our company at anytime, you'll not regret of the visiting.
3. Do you accept OEM?
A: Yes, we do OEM.
4. What's the MOQ of trial order?
A: We care about all the potential customers and take all the trails orders.
5. What is the payment term?
A: TT, LC, DP, DA.
6. How long is the delivery time?
A: Usually within 35 days after down payment.
7. Do you accept third party inspection ?
A: Yes for sure, we accept the third party inspection before delivery.
8. What is your after-sell service?
A: The rejected goods can be replaced or we can make compensation for it. We can send technical engineers to the end user for technical issue.
9.What is your company's certification?
A: ISO9001 certificate
){kind=link}