Fireclay Refractory Brick for Lining of Carbon Furnace
The Description:
The content of Al2O3 in carbon furnace clay bricks is generally 30%-40%, and the content of Fe2O3 is less than 2.0-2.5%. Clay bricks for carbon roaster are weakly acid refractory products, which can resist the erosion of acid slag and acid gas.
Clay brick for carbon culture furnace is based on the production of general clay brick, using specific homogenizing material as the main raw material, adding appropriate amount of additives, after fine grinding, mixing, high pressure molding, at the appropriate firing temperature into mullite crystal phase, the use of products with good mineral composition, Thus, the product has high refractoriness, compact volume density, low porosity, excellent high temperature creep performance and good volume stability.
Physical and Chemcial Techncal Index of Fireclay Refractory Brick for Lining of Carbon Furnace
Item |
Composite mullite brick |
MG-65 |
EN-58 |
AL2O3%≥ |
65 |
59 |
Fe2O3% |
1.5 |
1.5 |
Apparent porosity% |
17 |
17 |
B.D g/cm3 ≥ |
2.5 |
2.35 |
C.C.S Mpa ≥ |
70 |
60 |
Creep rate 0.2Mpa% |
0.3 |
0.3 |
0.2Mpa R.U.L ºCT0.6ºC |
1500 |
1500 |
Why choose us?
Zhengzhou Kaiyuan Refractories Co., Ltd is a manufacturer of silicon-aluminum refractory (fireclay brick, high alumina brick, silica brick, mullite brick, corundum brick, insulation brick, castable, mortar) for coke oven, blast furnace, hot blast stove, heating furnace, anode baking furnace, boilers and other industrial furnaces for 20 years located in Henan, China.
Our total annual production capacity is about 100,000 tons of dense-shaped refractory product, and 100,000 tons of monolithic refractory product.
We have three tunnel kilns for silicon-aluminum dense bricks and one new plant for the monolithic refractory.
We're sure our custom-made products and professional services will bring you a stable quality supply and more profit.
Our Laboratory and R&D Center
We have test equipment for the following items:
chemical %
bulk density
apparent porosity
cold crushing strength
modulus of rupture
refractoriness under load
creep
thermal expansion
Reheat linear change
thermal shock resistance
thermal conductivity
Contract Kiln Construction
FAQ
1. Are you a Manufacturer or trader?
A: We are manufacturer and our plant is located in Xinmi city, Henan, China
2. Can we visit your company?
A: You are warmly welcome to visit our company at anytime, you'll not regret of the visiting.
3. Do you accept OEM?
A: Yes, we do OEM.
4. What's the MOQ of trial order?
A: We care about all the potential customers and take all the trails orders.
5. What is the payment term?
A: TT, LC, DP, DA.
6. How long is the delivery time?
A: Usually within 35 days after down payment.
7. Do you accept third party inspection ?
A: Yes for sure, we accept the third party inspection before delivery.
8. What is your after-sell service?
A: The rejected goods can be replaced or we can make compensation for it. We can send technical engineers to the end user for technical issue.
9.What is your company's certification?
A: ISO9001 certificate