Phosphate Bonded Abrasive High Alumina Refractory Brick for Cement Industry
The Description:
Phosphate-high aluminum brick is one of the commonly used brick types of new dry process cement kiln, referred to as phosphate high aluminum brick or phosphate brick, based on high bauxite clinker as the main raw material, with phosphoric acid or aluminum phosphate as the adhesive, high pressure molding, in 400? High alumina refractory products, made by heat treatment at 600ºC. Phosphate-type high alumina brick has good thermal stability, when the temperature of cement kiln lining changes sharply, the high alumina phosphorus brick will not burst, do not flake off, and the kiln skin will not collapse. And easy to hang kiln skin, wear resistance, long service life.
The Physical and Chemical Index of Phosphate Bonded Abrasive High Alumina Refractory Brick for Cement Industry
Item |
Ordinary type |
Phosphate bonded abrasive brick |
Special phosphate brick |
Phosphate composite brick |
KYP-75 |
KYPA-75 |
KYPT-1 |
Heavy part |
Light part |
Al2O3 % |
75 |
75 |
80 |
75 |
55 |
Fe2O3 ≤ |
2.1 |
2.1 |
1.8 |
2 |
1.5 |
Refractoriness ºC |
1770 |
1770 |
1790 |
1770 |
|
Density kg/m3 |
2.7 |
2.75 |
2.9 |
2.8 |
1 |
CCS Mpa |
70 |
75 |
80 |
75 |
5.5 |
RUL ºC ≥ |
1350 |
1300 |
1520 |
1350 |
--- |
Thermal shock resistance1100ºC water cycle |
20 |
20 |
15 |
--- |
--- |
CCS at the bonded parts between heavy and light weight |
--- |
--- |
--- |
15 |
15 |
Application:.
Widely used in cement kilns, it can be used for pre-tropical zone, decomposition zone, transition zone, cooling zone lining. It can also be fired into strips with a cement kiln with a diameter of less than 3 meters.
classify
Building materials Industry standard JC350-1993 "phosphate bonded high alumina cement kiln bricks" is divided into two types according to the binder. The concentration of phosphate high aluminum brick bond is 42.5%. 50% liquid phosphate. The code is P, and the lock seam brick code is PC. High aluminic acid type wear-resistant brick (referred to as wear-resistant brick) prepared by industrial phosphoric acid and aluminum hydroxide, prepared by industrial aluminum hydroxide, its molar ratio is Al2O3:P2O5=1:3.2, code PA
Advantage:
High aluminum-phosphorus composite brick has high thermal strength, good thermal impact performance, good wear resistance and easy to hang kiln. Some cement manufacturers use it to produce small rotary kiln firing belt, transition belt, in the commissioning process often appear kiln stop, showing good performance.
The Picture:
Why choose us?
Zhengzhou Kaiyuan Refractories Co., Ltd is a manufacturer of silicon-aluminum refractory (fireclay brick, high alumina brick, silica brick, mullite brick, corundum brick, insulation brick, castable, mortar) for coke oven, blast furnace, hot blast stove, heating furnace, anode baking furnace, boilers and other industrial furnaces for 20 years located in Henan, China.
Our total annual production capacity is about 100,000 tons of dense-shaped refractory product, and 100,000 tons of monolithic refractory product.
We have three tunnel kilns for silicon-aluminum dense bricks and one new plant for the monolithic refractory.
We're sure our custom-made products and professional services will bring you a stable quality supply and more profit.
Our Laboratory and R&D Center
We have test equipment for the following items:
chemical %
bulk density
apparent porosity
cold crushing strength
modulus of rupture
refractoriness under load
creep
thermal expansion
Reheat linear change
thermal shock resistance
thermal conductivity
Contract Kiln Construction
FAQ
1. Are you a Manufacturer or trader?
A: We are manufacturer and our plant is located in Xinmi city, Henan, China
2. Can we visit your company?
A: You are warmly welcome to visit our company at anytime, you'll not regret of the visiting.
3. Do you accept OEM?
A: Yes, we do OEM.
4. What's the MOQ of trial order?
A: We care about all the potential customers and take all the trails orders.
5. What is the payment term?
A: TT, LC, DP, DA.
6. How long is the delivery time?
A: Usually within 35 days after down payment.
7. Do you accept third party inspection ?
A: Yes for sure, we accept the third party inspection before delivery.
8. What is your after-sell service?
A: The rejected goods can be replaced or we can make compensation for it. We can send technical engineers to the end user for technical issue.
9.What is your company's certification?
A: ISO9001 certificate