Zircon Mullite Refractory Brick for Refuse Incinerator

• Customization: Available
• Material: Zircon, Alumina Block
• Refractoriness (℃): 1580< Refractoriness< 1770
• Model NO.: AP-20
• Al2O3: Min46%
• Application: Industrial Blast Furnace
• Brick: High Alumina Brick
• Refractory Material: Fireproof Material
• Fire Brick: Zircon Mullite Brick
• Zro2: Min20%
• Feature: Long Time Materials
• Type: Refractory Material
• Transport Package: on Fumigated Wooden Pallets
• Specification: 220/114/64mm or as customer requirement
• Trademark: KAIYUAN
• Origin: China
• HS Code: 690220000
• Production Capacity: 2000 Tons/Month
• Package Size: 1000.00cm * 1000.00cm * 800.00cm
• Package Gross Weight: 1800.000kg

Product Description

Zircon Mullite Refractory Brick for Refuse Incinerator
The Description:
Zirconium mullite brick: Based on high bauxite, industrial aluminum oxide powder, sand and a small amount of flux Na 20, CaO, according to a certain chemical composition, the batching calculation (the compound should have appropriate particle composition) and after mixing, molding, drying, pre-burning, crushing and other processes, put into the three-phase arc furnace melting, and then after pouring, annealing, quality inspection, and obtained products. The system has the advantages of high mechanical properties, dense structure, low porosity and high softening degree under load. In addition to widely used in glass melting kilns.
The Physcial and Chemcial Index of Zircon Mullite Refractory Brick for Refuse Incinerator

Item	Zircon Mullite Brick	Corundum Andalusite	High Strength Abrasive Brick	Fireclay Brick
	AP-20	70-s	CR-60P	H-3
Al2O3 %	46	70	70	45
ZrO2         ≤	20	---	---	---
Fe2O3 ≤	0.5	1.5	1.5	2.0
Apparent porosity %        ≤	19	20	19	24
Density kg/m3	3.15	2.6	2.6	2.15
CCS Mpa	140	70	100	40
RUL ºC             ≥	1600	1560	1540	1420
Wear resistrance cm3	4	---	---	---

Characteristics of zirconium mullite brick:

1. Resistance to glass and alkali erosion, anti-erosion

2. High mechanical strength, good thermal shock stability

3. Reburning shrinkage and high temperature creep becomes smaller

4. Dense crystal structure

Zirconium mullites brick application: mainly used for glass melting part of the bottom, cooling part of the bottom, small furnace, regenerator cell lattice, L-shaped hanging wall nose area, etc.

It is an indispensable key supporting material for a wide range of applications in large float glass kilns.

Used in large glass kiln melting pool, picture tube kiln, regenerator wall brick and chemical, metallurgical industrial kiln by solution erosion parts.

 Company main ptoducts and profile:

Why choose us?

Zhengzhou Kaiyuan Refractories Co., Ltd is a manufacturer of silicon-aluminum refractory (fireclay brick, high alumina brick, silica brick, mullite brick, corundum brick, insulation brick, castable, mortar) for coke oven, blast furnace, hot blast stove, heating furnace, anode baking furnace, boilers and other industrial furnaces for 20 years located in Henan, China.

Our total annual production capacity is about 100,000 tons of dense-shaped refractory product, and 100,000 tons of monolithic refractory product.
We have three tunnel kilns for silicon-aluminum dense bricks and one new plant for the monolithic refractory.
We're sure our custom-made products and professional services will bring you a stable quality supply and more profit.

Our Laboratory and R&D Center

We have test equipment for the following items:
chemical %
bulk density
apparent porosity
cold crushing strength
modulus of rupture
refractoriness under load
creep
thermal expansion
Reheat linear change
thermal shock resistance
thermal conductivity

 

 

Contract Kiln Construction


FAQ

1. Are you a Manufacturer or trader?
A: We are manufacturer and our plant is located in Xinmi city, Henan, China

2. Can we visit your company?
A: You are warmly welcome to visit our company at anytime, you'll not regret of the visiting.

3. Do you accept OEM?
A: Yes, we do OEM.

4. What's the MOQ of trial order?
A: We care about all the potential customers and take all the trails orders.

5. What is the payment term?
A: TT, LC, DP, DA.

6. How long is the delivery time?
A: Usually within 35 days after down payment.

7. Do you accept third party inspection ?
A: Yes for sure, we accept the third party inspection before delivery.

8. What is your after-sell service?
A: The rejected goods can be replaced or we can make compensation for it. We can send technical engineers to the end user for technical issue.

9.What is your company's certification?
A: ISO9001 certificate