β- Alumina Fused Cast Alumina Refractory Brick for Glass Furnace Melting Pool
The Description:
The cast α-β-Al2O3 material contains about 45% α-Al2O3 and 55% β-Al2O3 phase, the impurity is about 1%, and the porosity is 2%. The fused β-Al2O3 is mainly composed of large grain β-Al2O3, the impurity phase is negligible, and the porosity is about 4%. Casting α-β or βAl2O3 material does not contain glass phase, and there is no refractory crystal phase, does not have an adverse effect on the quality of glass, and has good resistance to the erosion of sodium-calcium glass or alkali vapor below 1350ºC. Therefore, α-β-Al2O3 materials are widely used in cooling parts. The β-Al2O3 material is used for the upper structure of the dust-free part of the cooling part.
The α-β-Al2O3 fused casting material has hardly changed after 4-8 years of use as the arch of the all-oxygen combustion glass kiln. Alpha-β-al2o3 fused casting material as arch brick can be used for at least 2 kilns. Therefore, α-β-Al2O3 brick is the material of the upper structure of the all-oxygen glass kiln.
The physical and chemcial index of Dense a-AL2O3 Sintered Forehearth Refractory Brick for Glass Furnace
Item |
Unit |
Index |
AZS33#-Y |
AZS36#-Y |
AZS41#-Y |
Chemical composition% |
AL2O3 |
% |
others |
others |
others |
ZrO2 |
32-36 |
35-40 |
40-44 |
SiO2 |
16 |
14 |
13 |
Na2O |
1.5 |
1.6 |
1.3 |
Fe2O3+TiO2 |
0.3 |
0.3 |
0.3 |
physical properties |
Bulk density ≥ |
g/cm3 |
3.7 |
3.8 |
3.95 |
Apparent porosity % ≤ |
% |
1.5 |
1.5 |
1.3 |
Corrosion resistance of Glass Melt |
mm/24h |
1.6 |
1.5 |
1.3 |
Exudation Tem of Glass Phase |
ºC |
1400 |
1400 |
1400 |
Buddling seprate |
% |
2.0 |
1.5 |
1.0 |
Glass phase exudation |
% |
1 |
1 |
0.6 |
Thermal Expansion |
% |
0.8 |
0.8 |
0.8 |
bulk density |
PT.QX |
g/cm3 |
3.5 |
3.55 |
3.7 |
WS.ZWX |
3.7 |
3.8 |
3.95 |
Product feature:
Dense a-AL2O3 Sintered Forehearth Refractory Brick for Glass Furnace is casting refractories,after fusing of raw material fully into the mould,then cooling,annealing.According to the content of ZrO2 classified as AZS-33,AZS-36,AZS41,according to the cast way classified as regular cast,tilt cast,void free,End cut.Our company produce corresponding according to different use and customer requiremet.
Application:
Fused zirconium corundum brick refers to the use of industrial alumina powder and selected zircon sand as raw materials, made of ZrO2 content of 33%~45% refractory products. Fused zirconium corundum brick is mainly used in glass industry tank kiln, glass electric kiln, slide in steel industry, bubble alkali industry kiln and other kiln refractory materials with high temperature and erosion resistance.
Company main products and profiles:
Why choose us?
Zhengzhou Kaiyuan Refractories Co., Ltd is a manufacturer of silicon-aluminum refractory (fireclay brick, high alumina brick, silica brick, mullite brick, corundum brick, insulation brick, castable, mortar) for coke oven, blast furnace, hot blast stove, heating furnace, anode baking furnace, boilers and other industrial furnaces for 20 years located in Henan, China.
Our total annual production capacity is about 100,000 tons of dense-shaped refractory product, and 100,000 tons of monolithic refractory product.
We have three tunnel kilns for silicon-aluminum dense bricks and one new plant for the monolithic refractory.
We're sure our custom-made products and professional services will bring you a stable quality supply and more profit.
Our Laboratory and R&D Center
We have test equipment for the following items:
chemical %
bulk density
apparent porosity
cold crushing strength
modulus of rupture
refractoriness under load
creep
thermal expansion
Reheat linear change
thermal shock resistance
thermal conductivity
Contract Kiln Construction
FAQ
1. Are you a Manufacturer or trader?
A: We are manufacturer and our plant is located in Xinmi city, Henan, China
2. Can we visit your company?
A: You are warmly welcome to visit our company at anytime, you'll not regret of the visiting.
3. Do you accept OEM?
A: Yes, we do OEM.
4. What's the MOQ of trial order?
A: We care about all the potential customers and take all the trails orders.
5. What is the payment term?
A: TT, LC, DP, DA.
6. How long is the delivery time?
A: Usually within 35 days after down payment.
7. Do you accept third party inspection ?
A: Yes for sure, we accept the third party inspection before delivery.
8. What is your after-sell service?
A: The rejected goods can be replaced or we can make compensation for it. We can send technical engineers to the end user for technical issue.
9.What is your company's certification?
A: ISO9001 certificate